{"id":55,"date":"2026-08-18T13:11:53","date_gmt":"2026-08-18T13:11:53","guid":{"rendered":"https:\/\/dremetals.com\/teenused\/"},"modified":"2026-08-25T08:59:38","modified_gmt":"2026-08-25T08:59:38","slug":"teenused","status":"publish","type":"page","link":"https:\/\/dremetals.com\/en\/teenused\/","title":{"rendered":"teenused"},"content":{"rendered":"
\n
\n

<\/p>\n<\/div>\n\n\n\n

\n
\n
\"\"<\/figure>\n\n\n\n

Completed work- metal spraying of a decorative sculpture<\/p>\n\n\n\n

<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

Completed work- glass bead blasting of an industrial component<\/p>\n<\/div>\n\n\n\n

\n
\n
\n
\n

\u2014 Metal spraying<\/h3>\n\n\n\n

Metal spraying provides long-term corrosion protection for steel structures and components. We use the twin-wire arc spray process, in which metal wires are melted by an electric arc and atomised with compressed air onto a previously cleaned surface. This forms a strong, well- adhered and even metal coating. <\/p>\n\n\n\n

We use zinc, aluminium, zinc-aluminium alloys, copper, bronze, tin and other materials suitable for arc spraying, depending on the project requirements. <\/p>\n\n\n\n

If required, we can apply metal coatings with a thickness exceeding 1000 \u00b5m.<\/p>\n\n\n\n

<\/div>\n\n\n\n

When planning and carrying out metal spraying work, we follow the project's technical requirements EN ISO 2063<\/strong>, which covers the corrosion protection of steel using thermally sprayed zinc, aluminium and their alloys.<\/p>\n\n\n\n

The thickness of the finished metal coating is checked using measuring equipment and, depending on the project requirements, we provide a coating thickness measurement report. Certificates for the spray materials used can also be provided upon request. <\/p>\n\n\n\n

Depending on the project, we also work in accordance with EN ISO 14713<\/strong>, EN ISO 12944<\/strong> and EN ISO 9223<\/strong>.<\/p>\n\n\n\n

<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n

\u2014 Sandblasting and shot blasting<\/h3>\n\n\n\n

Sandblasting removes rust, old paint, scale and other contaminants from metal surfaces that may interfere with coating adhesion. Abrasive media is propelled at high velocity using compressed air, creating a clean surface with a suitable profile for painting, metal spraying or the application of other protective coatings.<\/p>\n\n\n\n

Shot blasting is an effective method for cleaning steel components and metal structures and preparing them for subsequent surface treatment. It removes rust, paint, scale and other surface contaminants.<\/p>\n\n\n\n

If required, we also carry out sandblasting at the customer's site.<\/strong><\/p>\n\n\n\n

<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n

\u2014 Glass bead basting<\/h3>\n\n\n\n

Glass bead blasting is suitable for gentle surface cleaning and for achieving a uniform matte finish. Fine glass beads are used in the process to clean the surface without causing excessive damage.<\/p>\n\n\n\n

Glass bead blasting is particularly suitable for:<\/strong><\/p>\n\n\n\n